6802108 Visits  
 
   Click to Login   Home  Recent Media  Media Gallery  *** AMAZRC Tube ***  Meet the pilots  Frequency Chart  Buy it used  Forum  RC Links  Shopping Zone  Contact Us  
 
Hady Esta's Media Gallery

 
Album The Amaz Life!
Date Saturday, September 05, 2009
Total Visits 1091
Members Comments 7
Notes An advanced power strip, totally engineered by Hady!

 Login to post your comment!
zibobman 
Sunday, September 06, 2009
is it like the one u did for the Mont La Salle Airshow :))?
akaram 
Monday, September 07, 2009
Is no Good ! The pushbutton switches are rated amaximum of 5 Amps so if you are going to conect a charger to any of the ports and charge some big lipo, the switch will smoke ! You should make fewer outputs and add a 30 - 50 amp relay for each output and the switch will control the relay and not the output itself !

hady 
Monday, September 07, 2009
hi guy's
this is a charging socket for multiple charger .
alexy you are right it is rated 6 amp yes but the maximum charging capacity i used till now is 4 amp maximum and i did it only once. usually you charge at a rate of 1.5 to 2.5 amp max yes you could go up tp 6 amp but i never did it .
are you charging your airplane battery at the rate of 10 amp ?

A helicopter in flight is a “bunch of spare parts flying in close formation.”
hady 
Monday, September 07, 2009
i am talking about 6 amp per socket :)

A helicopter in flight is a “bunch of spare parts flying in close formation.”
akaram 
Monday, September 07, 2009
If thats the case then fine, but if you try to charge a T-Rex 600 Lipo for instance at 5 amps, you will be drawing 10 amps from the socket @12v

DanyG. 
Monday, September 07, 2009
No worries Alex, thuis is the prototype. The one Hady will build for me can even give power to Zouk!!!

hady 
Monday, September 07, 2009
hahahahah promise dany i will build one that can handle zouk and litani together :)

A helicopter in flight is a “bunch of spare parts flying in close formation.”
 
 
 
 
 
 
 
 

AMAZRC.com is designed by Guy Boustany
Lebanon 2004 - 2020